Heltec Automation · Dev board

Heltec Mesh Node T114

Low-power nRF52 board for battery or solar nodes; Meshtastic community favorite.

Meshtastic: officially supportedMeshCore: supported
From $17.90List price on heltec.org, checked November 1, 2026

At a glance

Battery
Not included
GPS
Optional
Screen
Optional
Water resistance
Not listed
Chip
nRF52840 (low power)
List price
From $17.90

Strengths

  • nRF52840 chip, which Meshtastic says uses less power than ESP32 boards
  • Runs either Meshtastic or MeshCore

Trade-offs

  • No battery included; check the connector before buying one

Based on published specs, not hands-on testing.

Specifications

TypeDev board (low power)
ProcessornRF52840
LoRa radioSX1262 (21+/-1 dBm max)
US 915 MHz versionYes (902-928 MHz listed on heltec.org and Meshtastic page.)
ScreenOptional TFT 1.14 in (135x240)
KeyboardNo
GPSOptional (8-pin GNSS connector; optional L76K module.)
BatteryNone included; SH1.25x2 lithium battery connector
Solar inputYes (SH1.25x2 solar connector; Heltec FAQ: 5-6.5 V acceptable, ~5 V recommended.)
Wi-FiNo
BluetoothBluetooth 5.0
Water resistanceNot listed
List price$17.90–$33.70 (heltec.org price range across screen/GPS/shell options.)

Checked November 1, 2026. "Not listed" means the maker and official docs don't state it.

Known issues and cautions

From the maker's documentation and the official Meshtastic docs.

  • Heltec FAQ: some units fail to send long strings (>50 chars) ONLY in Long-Fast mode (SF11, 250K BW) under Meshtastic; Heltec says 433 MHz and 470 MHz versions are not affected.
  • heltec.org: the 2.4 GHz antenna is not replaceable.
  • Meshtastic docs: flash by double-clicking RST to enter DFU, then copy the UF2.

Similar devices

Compare Heltec Mesh Node T114 with Heltec WiFi LoRa 32 V3 / V3.1 and Heltec WiFi LoRa 32 V4

Sources

  1. meshtastic.org/docs/hardware/devices/heltec-automation/mesh-node/
  2. meshtastic.org/docs/hardware/devices/
  3. heltec.org/project/mesh-node-t114/
  4. github.com/meshcore-dev/flasher.meshcore.io/blob/main/config.json

Spotted an error? Send a correction.