Heltec Automation · Dev board

Heltec Wireless Tracker V2

Higher-power GPS board with solar input for DIY trackers or small solar nodes.

Meshtastic: officially supportedMeshCore: supported
From $30.90List price on heltec.org, checked November 1, 2026

At a glance

Battery
Not included
GPS
Yes
Screen
Color
Water resistance
Not listed
Chip
ESP32-S3 (Wi-Fi)
List price
From $30.90

Strengths

  • GPS built in for sharing your position
  • ESP32-S3 with Wi-Fi, needed for features like MQTT over Wi-Fi
  • Runs either Meshtastic or MeshCore

Trade-offs

  • No battery included; check the connector before buying one
  • ESP32 boards draw more power than nRF52 boards, per Meshtastic docs

Based on published specs, not hands-on testing.

Specifications

TypeDev board (with GNSS)
ProcessorESP32-S3 (ESP32-S3FN8)
LoRa radioSX1262 (up to 28+/-1 dBm)
US 915 MHz versionYes (902-928 MHz band option on heltec.org.)
ScreenTFT 0.96 in color (160x80)
KeyboardNo
GPSYes (UC6580 GNSS (dual-band capable per Meshtastic); heltec.org says the default antenna is L1-only.)
BatteryNone included; SH1.25x2 battery connector
Solar inputYes (1.25-2P solar panel interface (heltec.org).)
Wi-FiYes, 802.11 b/g/n
BluetoothBluetooth 5
Water resistanceNot listed
List price$30.90 (heltec.org.)

Checked November 1, 2026. "Not listed" means the maker and official docs don't state it.

Known issues and cautions

From the maker's documentation and the official Meshtastic docs.

  • Meshtastic docs: flashing uses the web flasher '1200bps reset' option.

Where sources disagree

  • Meshtastic page purchase links list only Heltec (international); no US retailer listed.

Similar devices

Compare Heltec Wireless Tracker V2 with Heltec WiFi LoRa 32 V3 / V3.1 and Heltec WiFi LoRa 32 V4

Sources

  1. meshtastic.org/docs/hardware/devices/heltec-automation/lora32/
  2. meshtastic.org/docs/hardware/devices/
  3. heltec.org/project/wireless-tracker-v2/
  4. github.com/meshcore-dev/flasher.meshcore.io/blob/main/config.json

Spotted an error? Send a correction.